Product Description
|
name
|
zirconium bar rod
|
|
working temperature
|
300~400 degree
|
|
blong to
|
non-ferrous metals
|
|
be used for
|
Flash, firework material
|
Introduction to zirconium alloy:
The zirconium alloy is a solid solution of zirconium or other metals. Zirconium has a very low thermal neutron absorption cross section, high hardness, ductility and corrosion resistance. The main use of zirconium alloys is in the field of nuclear
technology, such as fuel rods in nuclear reactors. Typical compositions of nuclear grade zirconium alloys are more than 95% zirconium and less than 2% tin, antimony, iron, chromium, nickel and other metals added to improve mechanical properties and corrosion resistance.
Zirconium alloy has good corrosion resistance, moderate mechanical properties and low atomic thermal neutron absorption cross section (Zirconium is 0.18 target) in high temperature and high pressure water and steam at 300-400 °C. It has good compatibility with nuclear fuel. It can be used as a core structural material for water-cooled nuclear reactors (fuel cladding, pressure pipes, supports and tunnel pipes), which is the main use of zirconium alloys. Zirconium has excellent corrosion resistance to various acids (such as hydrochloric acid, sulfuric acid, and acetic acid), alkalis, and salts, so zirconium alloys are also used to make corrosion resistant parts and pharmaceutical devices. Zirconium has a strong affinity with gases such as oxygen and nitrogen, so zirconium and zirconium alloys are also widely used as non-evaporable getters in the electric vacuum and bulb industries (see getter materials). Zirconium has excellent luminescent properties and is therefore a flash and pyrotechnic material.
Types of zirconium alloys:
There are two series of zirconium-based alloys produced on an industrial scale: zirconium tin and zirconium. The former is
represented by Zr-2 alloy, and the latter is represented by Zr-2.5Nb alloy. The composition and properties of zirconium and three zirconium alloys are shown in the table. The principle of alloying element selection of zirconium is: one can not significantly increase the thermal neutron absorption cross section of zirconium; the second is to improve the corrosion resistance and strength of zirconium without excessively impairing the process performance. In the zirconium-tin alloy, the comprehensive addition of tin, iron, chromium and nickel (Zr-2 alloy) can improve the strength and corrosion resistance of the material, the thermal conductivity of the corrosion-resistant film, and reduce the sensitivity of the surface state to corrosion; Zr-4 alloy does not contain nickel, and the iron content is appropriately increased. The corrosion absorption of this alloy is only about half of that of Zr-2 alloy. Usually Zr-2 alloy is used in boiling water reactors and Zr-4 alloy is used in pressurized water reactors. In the zirconium-lanthanum alloy, the corrosion resistance of the alloy is best when the amount of niobium added reaches the solid solution limit of α-Zr at the use temperature. The niobium content in the Zr-1Nb and Zr-2.5Nb alloys is higher than the solid solution limit at the use temperature. The excess enthalpy is present in the α-Zr in a supersaturated state, which is detrimental to the corrosion resistance of the alloy, but is much better in the form of the second phase β-Nb. Most of the metal impurity elements in zirconium and zirconium alloys are required to be below 50 ppm, and elements with large thermal neutron absorption cross sections (such as boron and cadmium) should not exceed 0.5 ppm; nitrogen with severe damage to corrosion resistance should not exceed 80 ppm; The strengthening effect, the content of which is generally 800 to 1600 ppm depending on the strength requirement..
Packaging & Shipping
vacuum packing
Every pcs of the all targets will be in vacuum packing septartely first to avoid oxidation,contaminated,contact touch and so on.
Non fumigation wooden box packing outside
Vacuum packing sputter will be packed in cartons with fixed support
Company Profile
Shandong Zehao Metal Materials Co., Ltd. is an enterprise engaged in the research, smelting and processing of titanium and its alloys, zirconium and its alloys, tungsten, molybdenum, monel, Inconel, chromium nickel alloys, nickel and other high-temperature alloys and corrosion-resistant alloys. The products cover plates, strips, profiles, bars, wires, pipes, pipe fittings, forged flanges, etc. The factory covers an area of 120000 square meters. Now it has a series of production equipment, including 2t vacuum induction furnace imported from the United States, 8t and 12t vacuum consumable arc furnaces made in Germany, 2800mm four high reversing mill, vacuum annealing furnace, etc. It can produce 2.6m * 16m plates, and the maximum length of a single pipe can reach 15m. At the same time, it has more than 100 sets of various testing instruments, including American NDT system, spectrum analyzer, carbon and sulfur analyzer, universal testing machine, ultrasonic flaw detection system, fatigue testing machine, etc. The company has more than ten years of export experience, and its products are exported to the United States, Britain, Germany, Russia, France, Brazil, Japan, South Korea, India, Vietnam, Australia, the Philippines, Zambia, Indonesia and other countries all year round Looking forward to cooperate with the new and old customers sincerely.
Our Advantages
FAQ
Q1: Can I order a sample quantity ?
A1: Yes, we have no MOQ.
Q2: Can I add my logo on the boxes/cartons?
A2: Yes,OEM and ODM are available from us.
Q3: What are the benefits of being a distributor ?
A3: Special discount Marketing protection.
Q4: How does your factory control the quality of your products?
A4: 100% self-inspection before packing. Quality is the life of our factory, first, each raw materials, come to our factory, we will test it first, if qualified, we will process the manufacturing with this raw materials, if not, we will return it to our supplier, and after each manufacturing step, we will test it, and then all the manufacturing process finished, we will do the final test before the commodities left our factory.
Q5: Can we mix items in one 20ft container?
A5: Yes.
Q6: Can I have a visit to your factory before the order?
A6: Sure,welcome your visit of factory.
Audited Supplier 
){kind=link}
){kind=link}